ALC-960MISO
Is a Network Loop Adder Module (motherboard) used in Mircom’s FleX-Net series intelligent fire alarm control panels. Its primary function is to expand the system’s capacity by providing additional Signaling Line Circuits (SLCs) for addressable fire alarm devices.
Related products
EFBW2ZFLEXI
Is a two-zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
MASB860
Intelligent, addressable wall-mounted sounder beacon for use in fire alarm systems that combines an audible sounder and a visual LED beacon for emergency evacuation signals. It is designed for low current consumption while providing high sound output and features a built-in short-circuit isolator and soft-addressing for easy installation. There is also a weatherproof (WP) version, the MASB860WP, with an IP66 rating for outdoor use.
UCPT-2W
S a two-wire, conventional photo-thermal fire detector from Eaton's UL-listed conventional detector range. It combines a photo-thermal detector with a thermal enhancement for faster detection of clean-burning fires while also detecting slower smoldering fires. It has a thermal alarm threshold of \(60^{\circ }C\) and is designed for environments where standard smoke detectors might trigger false alarms.
ULCAH330
Addressable heat detector Rate of rise with fixed heat sensor settings will detect a rapid increase in temperature or temperatures above 135°F, and should be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.
