NC941
A single zone call controller c/w a 12V 250mA PSU and link-selectable Mute/Reset button.
Fully compatible with C-TEC’s entire range of 800 Series Call System components.
Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
Power On and Alarm ‘CALLING ‘ LEDs.
Open collector output goes to 12V when the controller’s onboard buzzer sounds.
Mounts on a standard UK 25mm double gang flush or surface back box.
Optional NC941B 0.3A battery battery backup kit also available.
Description
Description
A single zone call controller c/w a 12V 250mA PSU and link-selectable Mute/Reset button.
Fully compatible with C-TEC’s entire range of 800 Series Call System components.
Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
Power On and Alarm ‘CALLING ‘ LEDs.
Open collector output goes to 12V when the controller’s onboard buzzer sounds.
Mounts on a standard UK 25mm double gang flush or surface back box.
Optional NC941B 0.3A battery battery backup kit also available.
Related products
EFBW4ZFLEXI
Is a four-zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
SD1+
Auto dailer is a security system speech dialler that connects to an alarm control panel and automatically dials up to four phone numbers to deliver pre-recorded voice messages when an alarm is triggered. It features four inputs for different alarm conditions (like fire, burglary, or personal attack), has a built-in microphone and speaker for message recording, and allows the recipient to acknowledge the call by pressing '8' on their phone
UCPT-2W
S a two-wire, conventional photo-thermal fire detector from Eaton's UL-listed conventional detector range. It combines a photo-thermal detector with a thermal enhancement for faster detection of clean-burning fires while also detecting slower smoldering fires. It has a thermal alarm threshold of \(60^{\circ }C\) and is designed for environments where standard smoke detectors might trigger false alarms.
ULMCOM-S
Is a compact, UL-listed single-channel output unit for Eaton's addressable fire alarm systems, which is identified by the panel as a sounder. It is used to control low-voltage devices by switching them, such as for fire door closures or plant shutdown circuits. The "S" designation signifies its primary use as a sounder, and it features easy, "plug and play" installation with no hard addressing required.