Description
Description
| 1/2.8” Sony 2.16M Pixels STARVIS CMOS H.264, MJPEG Multi Codec, Onvif Profile S(17.12v) High Performance Triple Streaming Day/Night with ICR, Min. 0.06Lux, LED on: 0Lux 2.8~12mm Mega Pixel DC Auto Iris Lens Motion Detection, Privacy Masking (4), Digital Zoom, Defog, 3DNR, LDC, Video Rotation (Corridor), WDR, SHDR, BLC Audio (1/1), Alarm (1/1), SD Slot(Max. 256GB) Built-In POWER IR LEDs(IR Distance 30m) |
Related products
EFBW2ZFLEXI
Is a two-zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
SD1+
Auto dailer is a security system speech dialler that connects to an alarm control panel and automatically dials up to four phone numbers to deliver pre-recorded voice messages when an alarm is triggered. It features four inputs for different alarm conditions (like fire, burglary, or personal attack), has a built-in microphone and speaker for message recording, and allows the recipient to acknowledge the call by pressing '8' on their phone
UCHR-2W
Is a 2-wire conventional fire detector that combines both rate-of-rise and fixed heat detection. It is designed to respond to a rapid increase in temperature and/or temperatures exceeding a threshold of \(135^{\circ }F\) (\(60^{\circ }C\)), making it suitable for environments where smoke detectors may cause false alarms, such as those with high levels of dust or steam.
ULCAH330
Addressable heat detector Rate of rise with fixed heat sensor settings will detect a rapid increase in temperature or temperatures above 135°F, and should be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.
ULMCOM-S
Is a compact, UL-listed single-channel output unit for Eaton's addressable fire alarm systems, which is identified by the panel as a sounder. It is used to control low-voltage devices by switching them, such as for fire door closures or plant shutdown circuits. The "S" designation signifies its primary use as a sounder, and it features easy, "plug and play" installation with no hard addressing required.