ACD-ATR14CS
RFID Card The ACD-ATR14CS proximity read-only calm shell card
offers universal compability with the Wiegand IF
reader type W 3. The card includes an embedded
antenna, and an RFID integrated circuit including a
pinted number on the face of the card enabling
contactless reading by readers.
Antenna
Copper coil
Dimensions
85,6 x 54 x 1,84 mm
(3.37” x 2.13”x 0.08”)
Weight
This card is durable with IP 68 and can be fully
submerged, all the electronics is sealed inside.
Ordering Information
9,5 g (0.335 Onc
Description
Description
RFID Card The ACD-ATR14CS proximity read-only calm shell card
offers universal compability with the Wiegand IF
reader type W 3. The card includes an embedded
antenna, and an RFID integrated circuit including a
pinted number on the face of the card enabling
contactless reading by readers.
Antenna
Copper coil
Dimensions
85,6 x 54 x 1,84 mm
(3.37” x 2.13”x 0.08”)
Weight
This card is durable with IP 68 and can be fully
submerged, all the electronics is sealed inside.
Ordering Information
9,5 g (0.335 Onc
Related products
EFBW4ZFLEXI
Is a four-zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
EFBW8ZFLEX
Is aeight -zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
FL-RL-RS
Is a conventional xenon sounder beacon, an audible and visual fire alarm device that combines a sounder and a flashing light in a single unit. It is used in fire alarm systems, reduces installation costs by only requiring one installation point, and is available in versions with linked or independent operation for the sounder and beacon. The "-S" typically denotes a shallow base, while "-D" denotes a deep base or weatherproof version
MASB860
Intelligent, addressable wall-mounted sounder beacon for use in fire alarm systems that combines an audible sounder and a visual LED beacon for emergency evacuation signals. It is designed for low current consumption while providing high sound output and features a built-in short-circuit isolator and soft-addressing for easy installation. There is also a weatherproof (WP) version, the MASB860WP, with an IP66 rating for outdoor use.
MBG914
Conventional fire alarm manual call point that is surface-mounted and used for fire emergency signaling. It is red, features a break-glass design with a protective film on the glass, and is easy to install. Key features include a high-visibility status LED, compatibility with Menvier conventional fire panels, and an included test key for maintenance.
UCHR-2W
Is a 2-wire conventional fire detector that combines both rate-of-rise and fixed heat detection. It is designed to respond to a rapid increase in temperature and/or temperatures exceeding a threshold of \(135^{\circ }F\) (\(60^{\circ }C\)), making it suitable for environments where smoke detectors may cause false alarms, such as those with high levels of dust or steam.
ULMCOM-S
Is a compact, UL-listed single-channel output unit for Eaton's addressable fire alarm systems, which is identified by the panel as a sounder. It is used to control low-voltage devices by switching them, such as for fire door closures or plant shutdown circuits. The "S" designation signifies its primary use as a sounder, and it features easy, "plug and play" installation with no hard addressing required.