MR-401R
Addressable Fire Alarm Control Panel,provides the following ,Main Board, Power Supply and Backbox,
One on-board addressable (SLC) loop for Secutron ,addressable devices (MRI-4000 Series), 240 devices per
loop, Expandable to three addrassable loops for a maximum of, 720 Secutron addressable devices (MRI-4000 Series), 240, devices per loop, Flexible zone and group configuration options, Compatible with Secutron addressable devices (MRI-4000)
Description
Description
Addressable Fire Alarm Control Panel,provides the following ,Main Board, Power Supply and Backbox,
One on-board addressable (SLC) loop for Secutron ,addressable devices (MRI-4000 Series), 240 devices per
loop, Expandable to three addrassable loops for a maximum of, 720 Secutron addressable devices (MRI-4000 Series), 240, devices per loop, Flexible zone and group configuration options, Compatible with Secutron addressable devices (MRI-4000)
Related products
EFBW8ZFLEX
Is aeight -zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
MBG914
Conventional fire alarm manual call point that is surface-mounted and used for fire emergency signaling. It is red, features a break-glass design with a protective film on the glass, and is easy to install. Key features include a high-visibility status LED, compatibility with Menvier conventional fire panels, and an included test key for maintenance.
UCHR-2W
Is a 2-wire conventional fire detector that combines both rate-of-rise and fixed heat detection. It is designed to respond to a rapid increase in temperature and/or temperatures exceeding a threshold of \(135^{\circ }F\) (\(60^{\circ }C\)), making it suitable for environments where smoke detectors may cause false alarms, such as those with high levels of dust or steam.
UCPD-2W
2-Wire, conventional optical smoke detector from Eaton's UL-listed conventional detector range. It's designed for easy installation and maintenance, featuring a discreet, aesthetically pleasing design, a common mounting base, and 360° visibility via a lightpipe LED. This detector is best for detecting slow-burning or smoldering fires that produce large, visible smoke particles.
ULMCIM-C
Is a compact, soft-addressed single-channel input module for Eaton intelligent addressable fire alarm systems that monitors non-addressable, dry contact devices like water flow switches or auxiliary fault signals. The "-C" variant is specifically designed for use with pull stations and is identified by the panel as a callpoint. It features an integral short circuit isolator and can be easily installed inside other equipment.
ULMCOM-S
Is a compact, UL-listed single-channel output unit for Eaton's addressable fire alarm systems, which is identified by the panel as a sounder. It is used to control low-voltage devices by switching them, such as for fire door closures or plant shutdown circuits. The "S" designation signifies its primary use as a sounder, and it features easy, "plug and play" installation with no hard addressing required.