MRI-4030
Is a tri-mode heat detector from Secutron/Mircom Technologies that provides early fire warning by monitoring ambient temperature. It operates in one of three modes: fixed temperature at either \(135^{\circ }F\) (\(57^{\circ }C\)) or \(175^{\circ }F\) (\(79^{\circ }C\)), or rate-of-rise detection, and communicates with a compatible fire alarm control panel. The detector is part of the MRI-4000 series, which can support up to 240 devices on a single Signaling Line Circuit (SLC) and uses tri-color LEDs for status indication.
Description
Description
Is a tri-mode heat detector from Secutron/Mircom Technologies that provides early fire warning by monitoring ambient temperature. It operates in one of three modes: fixed temperature at either \(135^{\circ }F\) (\(57^{\circ }C\)) or \(175^{\circ }F\) (\(79^{\circ }C\)), or rate-of-rise detection, and communicates with a compatible fire alarm control panel. The detector is part of the MRI-4000 series, which can support up to 240 devices on a single Signaling Line Circuit (SLC) and uses tri-color LEDs for status indication.
Related products
EFBW4ZFLEXI
Is a four-zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
FL-RL-RD
Conventional xenon sounder beacon for fire and industrial alarm systems, providing both a loud audible alarm and a bright visual flashing light. The "D" in the model number specifically denotes the deep base variant, which is often weatherproof (IP65 rated) for harsher environments. It combines a sounder and a visual beacon into a single unit, reducing installation time and cost.
FL-RL-RS
Is a conventional xenon sounder beacon, an audible and visual fire alarm device that combines a sounder and a flashing light in a single unit. It is used in fire alarm systems, reduces installation costs by only requiring one installation point, and is available in versions with linked or independent operation for the sounder and beacon. The "-S" typically denotes a shallow base, while "-D" denotes a deep base or weatherproof version
UCHR-2W
Is a 2-wire conventional fire detector that combines both rate-of-rise and fixed heat detection. It is designed to respond to a rapid increase in temperature and/or temperatures exceeding a threshold of \(135^{\circ }F\) (\(60^{\circ }C\)), making it suitable for environments where smoke detectors may cause false alarms, such as those with high levels of dust or steam.
ULMCIM-C
Is a compact, soft-addressed single-channel input module for Eaton intelligent addressable fire alarm systems that monitors non-addressable, dry contact devices like water flow switches or auxiliary fault signals. The "-C" variant is specifically designed for use with pull stations and is identified by the panel as a callpoint. It features an integral short circuit isolator and can be easily installed inside other equipment.
ULMCOM
Addressable control module a compact, UL-listed micro single-channel output unit for Eaton intelligent addressable fire alarm systems. It provides a solution for switching low-voltage control circuits, such as for HVAC, plant shutdown, or fire doors, and features soft addressing and an integral short-circuit isolator.
ULMCOM-S
Is a compact, UL-listed single-channel output unit for Eaton's addressable fire alarm systems, which is identified by the panel as a sounder. It is used to control low-voltage devices by switching them, such as for fire door closures or plant shutdown circuits. The "S" designation signifies its primary use as a sounder, and it features easy, "plug and play" installation with no hard addressing required.