MS-401U
is a durable, red, aluminum manual fire alarm pull station for initiating a fire alarm signal. It is a non-coded, single-action device designed for commercial, industrial, or residential buildings, and it can be easily reset with a 1/8” screwdriver. The handle remains in the “pulled” position until manually reset, and it can also be converted to a double-action station with an additional lever.
Description
Description
is a durable, red, aluminum manual fire alarm pull station for initiating a fire alarm signal. It is a non-coded, single-action device designed for commercial, industrial, or residential buildings, and it can be easily reset with a 1/8” screwdriver. The handle remains in the “pulled” position until manually reset, and it can also be converted to a double-action station with an additional lever.
Related products
FL-RL-RD
Conventional xenon sounder beacon for fire and industrial alarm systems, providing both a loud audible alarm and a bright visual flashing light. The "D" in the model number specifically denotes the deep base variant, which is often weatherproof (IP65 rated) for harsher environments. It combines a sounder and a visual beacon into a single unit, reducing installation time and cost.
MASB860
Intelligent, addressable wall-mounted sounder beacon for use in fire alarm systems that combines an audible sounder and a visual LED beacon for emergency evacuation signals. It is designed for low current consumption while providing high sound output and features a built-in short-circuit isolator and soft-addressing for easy installation. There is also a weatherproof (WP) version, the MASB860WP, with an IP66 rating for outdoor use.
SG42BK1
Addressable manual station double action • Single/dual action options, Complete with Initiating module
(addressable variants only), Key reset , Corrosion resistant gold plated SPST contacts,High-gloss red enamel finish with raised, white lettering, Class A, style 7 SLC, Quick and simple to install, High quality die cast metal case for lasting, performance, No hard addressing required with initiating unit (ULMCIM-C - plug and play)
Easy to maintain/service.
UCPD-2W
2-Wire, conventional optical smoke detector from Eaton's UL-listed conventional detector range. It's designed for easy installation and maintenance, featuring a discreet, aesthetically pleasing design, a common mounting base, and 360° visibility via a lightpipe LED. This detector is best for detecting slow-burning or smoldering fires that produce large, visible smoke particles.
ULCAH330
Addressable heat detector Rate of rise with fixed heat sensor settings will detect a rapid increase in temperature or temperatures above 135°F, and should be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.
