NC951
Accessible Disabled Persons Toilet Alarm Kit
Allows a distressed person to raise an alarm in an emergency. To operate, the user pulls the cord of
the ceiling/wall pull to activate a light and sounder outside the WC and on the system’s Call Controller.
The system’s ‘Call Accept’ function allows staff to send an intermittent call acknowledgment signal to the WC to
confirm help is on the way.
Includes an NC943B 12V 140mA Call Controller c/w standby battery & relay, NC807C Ceiling/Wall Pull, NC806CS
Overdoor Light c/w Sounder, NC809DBBT Accessible Toilet Reset Point c/w Sounder & NC949 Accessible WC
Sticker.Accessible Disabled Persons Toilet Alarm Kit
Allows a distressed person to raise an alarm in an emergency. To operate, the user pulls the cord of
the ceiling/wall pull to activate a light and sounder outside the WC and on the system’s Call Controller.
The system’s ‘Call Accept’ function allows staff to send an intermittent call acknowledgment signal to the WC to
confirm help is on the way.
Includes an NC943B 12V 140mA Call Controller c/w standby battery & relay, NC807C Ceiling/Wall Pull, NC806CS
Overdoor Light c/w Sounder, NC809DBBT Accessible Toilet Reset Point c/w Sounder & NC949 Accessible WC
Sticker.
Description
Description
Accessible Disabled Persons Toilet Alarm Kit
Allows a distressed person to raise an alarm in an emergency. To operate, the user pulls the cord of
the ceiling/wall pull to activate a light and sounder outside the WC and on the system’s Call Controller.
The system’s ‘Call Accept’ function allows staff to send an intermittent call acknowledgment signal to the WC to
confirm help is on the way.
Includes an NC943B 12V 140mA Call Controller c/w standby battery & relay, NC807C Ceiling/Wall Pull, NC806CS
Overdoor Light c/w Sounder, NC809DBBT Accessible Toilet Reset Point c/w Sounder & NC949 Accessible WC
Sticker.
Related products
EFBW4ZFLEXI
Is a four-zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
FL-RL-RS
Is a conventional xenon sounder beacon, an audible and visual fire alarm device that combines a sounder and a flashing light in a single unit. It is used in fire alarm systems, reduces installation costs by only requiring one installation point, and is available in versions with linked or independent operation for the sounder and beacon. The "-S" typically denotes a shallow base, while "-D" denotes a deep base or weatherproof version
UCPD-2W
2-Wire, conventional optical smoke detector from Eaton's UL-listed conventional detector range. It's designed for easy installation and maintenance, featuring a discreet, aesthetically pleasing design, a common mounting base, and 360° visibility via a lightpipe LED. This detector is best for detecting slow-burning or smoldering fires that produce large, visible smoke particles.
ULCAH330
Addressable heat detector Rate of rise with fixed heat sensor settings will detect a rapid increase in temperature or temperatures above 135°F, and should be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.
ULMCOM-S
Is a compact, UL-listed single-channel output unit for Eaton's addressable fire alarm systems, which is identified by the panel as a sounder. It is used to control low-voltage devices by switching them, such as for fire door closures or plant shutdown circuits. The "S" designation signifies its primary use as a sounder, and it features easy, "plug and play" installation with no hard addressing required.