NP2
Pear Leads.
Our attractively styled pear leads allow access to the call system when residents are
away from the call point. The lead is available in 2Metre and 4 Metre lengths and the
right angle jack plug means that the plug is less likely to be damaged by furniture
movement.
Description
Description
Pear Leads.
Our attractively styled pear leads allow access to the call system when residents are
away from the call point. The lead is available in 2Metre and 4 Metre lengths and the
right angle jack plug means that the plug is less likely to be damaged by furniture
movement.
Related products
L628
LCD Displays.
A Display Unit is required in every location where calls are to be shown and the alarm is to
sound. It features LCD display with backlight, multi-level adjustable alarm, day/night volume
control, ‘Priority’ alarm tone for specific call locations, configuration menus and an output
which can be connected to trigger external equipment. All displays are identical but can be
configured on site to operate independently.
NC802DB
Standard Call Point, Button Reset c/w Remote Socket
An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
Red reassurance LED confirms a call has been made.
Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
Mounts on a standard UK 25mm single gang flush or surface back box.
NC805C/6
1.8m (6ft) Tail Call Lead
A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
Allows users to remotely generate Standard calls from armchairs, beds, etc.
Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
Connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points. If connecting to a Quantec-Pro call point, a QP805G1A (6.5mm to RJ12) adaptor is also required,
Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
NC806CS
Overdoor Light c/w Sounder
Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted
with an 800 Series calling device.
Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red
light.
Dual red LEDs and triangular diffuser make it highly visible from a distance.
Mounts on a standard UK 25mm single gang flush or surface back box.
Can also be used as an 'area indicator' at corridor junctions, staff workstations, etc.
Finished in tough, durable ABS plastic.
Also available as part of the NC951 Accessible Toilet Alarm kit.
Stainless steel version also available.
NC910S
10 Zone Call Controller c/w 300mA PSU (Surface Version)
Compatible with C-TEC’s entire range of 800 Series field devices.
Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
Two call levels – standard (constant tone) and emergency (intermittent tone).
Optional mute and call accept/reset buttons.
‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used).
Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.
Innovative slide-in labelling system.
QT-601-2
Quantec Controller
Supplies power to and controls a Quantec Addressable Call System.
Monitors all network devices and manages the routing and distribution of all calls.
Provides connections for network wiring, standby batteries, a laptop (for system programming), optional paging/DECT equipment, an optional printer or PC (to run Quantec’s QT707S Surveyor data management software).
Includes a library of 40 pre-set & 45 custom place names.
System setup requires a laptop PC running Quantec’s QT707 programming tools.
Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure.
System wiring requires one or more QT603 network splitters.
Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 T&E (spines) and 4 to 8 core stranded security cable (limbs)
QT606
Overdoor Light
Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc.
Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call.
Dual red and green LEDs and triangular diffuser make it highly visible from a distance.
Mounts on a standard UK 25mm single gang flush or surface back box.
Finished in tough, durable ABS plastic.
Overdoor lights with sounders and addressable overdoor lights and sounders (to provide area indication at corridor junctions etc.) are also available.
Touch Display 948
The Touch Display is the central hub of the Touch series
nurse call system and the primary staff interaction point.
It helps nursing staff with monitoring while notifying them
of calls and alerts on the system, allowing them to decide
the most appropriate response. Multiple displays can be
installed, ideally on a desk or wall mounted, depending
on the size and individual needs of the care facility