ARD-AYK12
Card reader, EM, mini mullion The ARD-AYK12 RFID proximity reader is a very small
and non-contact access control reader.
The reader operates through a Wiegand interface.
It is suitable for wall mounting and supports EM
cards.
A multicolored LED and a beeper give clear feedback
to the user during operation.
The reader is IP 65 rated and appropriate for indoor
and outdoor uses.
Description
Description
Card reader, EM, mini mullion The ARD-AYK12 RFID proximity reader is a very small
and non-contact access control reader.
The reader operates through a Wiegand interface.
It is suitable for wall mounting and supports EM
cards.
A multicolored LED and a beeper give clear feedback
to the user during operation.
The reader is IP 65 rated and appropriate for indoor
and outdoor uses.
Related products
EFBW4ZFLEXI
Is a four-zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
MBG914
Conventional fire alarm manual call point that is surface-mounted and used for fire emergency signaling. It is red, features a break-glass design with a protective film on the glass, and is easy to install. Key features include a high-visibility status LED, compatibility with Menvier conventional fire panels, and an included test key for maintenance.
SD1+
Auto dailer is a security system speech dialler that connects to an alarm control panel and automatically dials up to four phone numbers to deliver pre-recorded voice messages when an alarm is triggered. It features four inputs for different alarm conditions (like fire, burglary, or personal attack), has a built-in microphone and speaker for message recording, and allows the recipient to acknowledge the call by pressing '8' on their phone
SG42BK1
Addressable manual station double action • Single/dual action options, Complete with Initiating module
(addressable variants only), Key reset , Corrosion resistant gold plated SPST contacts,High-gloss red enamel finish with raised, white lettering, Class A, style 7 SLC, Quick and simple to install, High quality die cast metal case for lasting, performance, No hard addressing required with initiating unit (ULMCIM-C - plug and play)
Easy to maintain/service.
ULCAH330
Addressable heat detector Rate of rise with fixed heat sensor settings will detect a rapid increase in temperature or temperatures above 135°F, and should be used in environments where the ambient conditions might cause false alarms if smoke detection were to be used, for example where there is a high level of dust, fumes, steam or smoke under normal conditions.
ULMCIM-C
Is a compact, soft-addressed single-channel input module for Eaton intelligent addressable fire alarm systems that monitors non-addressable, dry contact devices like water flow switches or auxiliary fault signals. The "-C" variant is specifically designed for use with pull stations and is identified by the panel as a callpoint. It features an integral short circuit isolator and can be easily installed inside other equipment.
ULMCOM
Addressable control module a compact, UL-listed micro single-channel output unit for Eaton intelligent addressable fire alarm systems. It provides a solution for switching low-voltage control circuits, such as for HVAC, plant shutdown, or fire doors, and features soft addressing and an integral short-circuit isolator.