NP2
Pear Leads.
Our attractively styled pear leads allow access to the call system when residents are
away from the call point. The lead is available in 2Metre and 4 Metre lengths and the
right angle jack plug means that the plug is less likely to be damaged by furniture
movement.
Description
Description
Pear Leads.
Our attractively styled pear leads allow access to the call system when residents are
away from the call point. The lead is available in 2Metre and 4 Metre lengths and the
right angle jack plug means that the plug is less likely to be damaged by furniture
movement.
Related products
L622
Standard Call Point.
A Call Point is required for every individual call location on the system. It features six levels of
call, multi-colour re-assurance LED & ‘call follower’ sounder. The industry standard trigger
socket will accept pear leads, pressure mats, portable radio triggers and a host of other triggering
devices.
NC805C/6
1.8m (6ft) Tail Call Lead
A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
Allows users to remotely generate Standard calls from armchairs, beds, etc.
Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
Connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points. If connecting to a Quantec-Pro call point, a QP805G1A (6.5mm to RJ12) adaptor is also required,
Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
NC807C
Ceiling/Wall Pull Unit
Can be used to generate a standard call on an 800 Series Conventional Call System.
Ceiling or wall mountable.
Typically wired to an 800 Series Call Point or Reset Point so that its calls can be cancelled.
Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
Surface mountable.
Base fits 16mm conduit and BESA centres.
NC944
Four Zone Call Controller (requires NC930 12V 250mA PSU)
An attractively-designed four zone call controller c/w mute and reset buttons.
Fully compatible with C-TEC's entire range of 800 Series Call System components.
Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
Requires a separate NC930 12V 250mA PSU.
Includes four zonal alarm LEDs, RESET and MUTE buttons.
Two open collector outputs (Emergency and Aux Out).
Up to two NC944s can be connected to one NC930 PSU to create a mini-call system of up to 8 zones.
Mounts on a standard 25mm UK double gang back box.
QT606
Overdoor Light
Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc.
Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call.
Dual red and green LEDs and triangular diffuser make it highly visible from a distance.
Mounts on a standard UK 25mm single gang flush or surface back box.
Finished in tough, durable ABS plastic.
Overdoor lights with sounders and addressable overdoor lights and sounders (to provide area indication at corridor junctions etc.) are also available.
Touch Display Plus 958
The Touch Display Plus has all the functionality
of our Touch Display, with the addition of
a full duplex VoIP speech device.
Perfect for larger hospitals or care residences,
the Touch Display Plus allows staff to speak
to patients and residents allowing them to
decide the most appropriate response.