946

Overdoor Light c/w Sounder Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light. Dual red LEDs and triangular diffuser make it highly visible from a distance. Mounts on a standard UK 25mm single gang flush or surface back box. Can also be used as an 'area indicator' at corridor junctions, staff workstations, etc. Finished in tough, durable ABS plastic. Also available as part of the NC951 Accessible Toilet Alarm kit. Stainless steel version also available.

20 Zone Call Controller c/w 300mA PSU (Surface Version) 20 Zone Call Controller c/w 300mA PSU (Surface Version) Compatible with C-TEC’s entire range of 800 Series field devices. Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm Two call levels – standard (constant tone) and emergency (intermittent tone). Optional mute and call accept/reset buttons. ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used). Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.

Quantec Network Splitter An essential wiring/installation aid for C-TEC’s Quantec Addressable Call System. Helps protect against open and short circuit faults and reduces the risk of volt drop. Includes one input and one output connection for Quantec’s ‘Spine’ wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec’s field devices (typically 4 core stranded security cable). At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find). Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs. Mounts on a standard 25mm UK double gang back box. ‘Power’ and ‘Fault’ indicators. Max. 60 addressable devices per QT603.

Ceiling/Wall Pull Unit Can be used to generate a Standard or Ensuite call on a Quantec Addressable Call System. Ceiling or wall mountable. Typically wired to a Quantec Addressable Call Point or Quantec Accessible Toilet Reset Point. Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm. Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made. Surface mountable