Related products
NC806CS
Overdoor Light c/w Sounder
Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted
with an 800 Series calling device.
Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red
light.
Dual red LEDs and triangular diffuser make it highly visible from a distance.
Mounts on a standard UK 25mm single gang flush or surface back box.
Can also be used as an 'area indicator' at corridor junctions, staff workstations, etc.
Finished in tough, durable ABS plastic.
Also available as part of the NC951 Accessible Toilet Alarm kit.
Stainless steel version also available.
NC944
Four Zone Call Controller (requires NC930 12V 250mA PSU)
An attractively-designed four zone call controller c/w mute and reset buttons.
Fully compatible with C-TEC's entire range of 800 Series Call System components.
Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
Requires a separate NC930 12V 250mA PSU.
Includes four zonal alarm LEDs, RESET and MUTE buttons.
Two open collector outputs (Emergency and Aux Out).
Up to two NC944s can be connected to one NC930 PSU to create a mini-call system of up to 8 zones.
Mounts on a standard 25mm UK double gang back box.
QT-601-2
Quantec Controller
Supplies power to and controls a Quantec Addressable Call System.
Monitors all network devices and manages the routing and distribution of all calls.
Provides connections for network wiring, standby batteries, a laptop (for system programming), optional paging/DECT equipment, an optional printer or PC (to run Quantec’s QT707S Surveyor data management software).
Includes a library of 40 pre-set & 45 custom place names.
System setup requires a laptop PC running Quantec’s QT707 programming tools.
Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure.
System wiring requires one or more QT603 network splitters.
Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 T&E (spines) and 4 to 8 core stranded security cable (limbs)
QT606
Overdoor Light
Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc.
Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call.
Dual red and green LEDs and triangular diffuser make it highly visible from a distance.
Mounts on a standard UK 25mm single gang flush or surface back box.
Finished in tough, durable ABS plastic.
Overdoor lights with sounders and addressable overdoor lights and sounders (to provide area indication at corridor junctions etc.) are also available.
QT608CD1S
Quantec Large Corridor Display
A large 16 character x 2 line LED display measuring 965mm x 163mm making it ideal for use in long corridors, nursing stations, staff rooms and offices.
Utilises the latest LED technology to visually inform staff of the location of incoming calls (and occupied rooms) in large, easy-to-read text.
All calls are displayed in red text except presence calls which are displayed in green.
When no calls are present on the system the current time is shown in green.
Typically used in conjunction with one or more standard QT608C displays as scroll and accept buttons ARE NOT included.
Mains powered.
Connects to Quantec via a QT615 display interface unit utilising a monitored RS232 data connection.
Touch Display Plus 958
The Touch Display Plus has all the functionality
of our Touch Display, with the addition of
a full duplex VoIP speech device.
Perfect for larger hospitals or care residences,
the Touch Display Plus allows staff to speak
to patients and residents allowing them to
decide the most appropriate response.