Related products
L628
LCD Displays.
A Display Unit is required in every location where calls are to be shown and the alarm is to
sound. It features LCD display with backlight, multi-level adjustable alarm, day/night volume
control, ‘Priority’ alarm tone for specific call locations, configuration menus and an output
which can be connected to trigger external equipment. All displays are identical but can be
configured on site to operate independently.
NC806CS
Overdoor Light c/w Sounder
Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted
with an 800 Series calling device.
Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red
light.
Dual red LEDs and triangular diffuser make it highly visible from a distance.
Mounts on a standard UK 25mm single gang flush or surface back box.
Can also be used as an 'area indicator' at corridor junctions, staff workstations, etc.
Finished in tough, durable ABS plastic.
Also available as part of the NC951 Accessible Toilet Alarm kit.
Stainless steel version also available.
NC910S
10 Zone Call Controller c/w 300mA PSU (Surface Version)
Compatible with C-TEC’s entire range of 800 Series field devices.
Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
Two call levels – standard (constant tone) and emergency (intermittent tone).
Optional mute and call accept/reset buttons.
‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used).
Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.
Innovative slide-in labelling system.
NC944
Four Zone Call Controller (requires NC930 12V 250mA PSU)
An attractively-designed four zone call controller c/w mute and reset buttons.
Fully compatible with C-TEC's entire range of 800 Series Call System components.
Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
Requires a separate NC930 12V 250mA PSU.
Includes four zonal alarm LEDs, RESET and MUTE buttons.
Two open collector outputs (Emergency and Aux Out).
Up to two NC944s can be connected to one NC930 PSU to create a mini-call system of up to 8 zones.
Mounts on a standard 25mm UK double gang back box.
QT602
Quantec Addressable Call Point, Button Reset c/w Remote Socket
A programmable addressable call point c/w remote jack socket for use with C-TEC’s Quantec Addressable Call System.
Includes a Call button, Reset button and red/green confidence light.
Can make up to 5 levels of call – Standard, Ensuite, Help Required, Emergency, Presence & Attendance (dependent on configuration and ancillary devices used). Attack and Attendance calls can also be made if connected to compatible infrared receiver.
Remote socket allows the connection of optional tail call leads, pressure mats, etc.
Can be programmed to operate in a multitude of ways using a QT423 configurator.
Connections provided for ancillary devices such as ceiling pulls, overdoor lights, infrared receivers and more
QT608C
Quantec Corridor Display
A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc.
Includes an onboard sounder and buttons to accept, scroll through and manually divert calls.
Shows call type, call location and (depending on the device used to make the call) the User ID or name of the person calling.
Highest priority calls are shown first with a message saying how many calls are waiting.
Flash and sounder rates intensify to reflect the urgency of incoming calls.
Adjustable contrast and volume controls.
External sounder connection.