Light Current
PRONVR64XRPKI
NVR of the PRO line with 64 IP channels supporting a maximum video resolution of 16 Mpx. It handles Start or Galaxy analysis of all connected e-Vision PRO cameras.
t supports up to 8 channels with on-board AI Start functions, useful for cameras that are not natively equipped.
It features 1 VGA video output and 4 HDMI video outputs (1 main monitor with up to 8K resolution, 2 spot monitors with up to 4K resolution and 1 spot monitor with 1080p resolution). It integrates 2 on-board LAN ports. It has slots for 8 internal HDDs and 2 eSATA ports with a maximum capacity of 10 TB each, and supports RAID 0 - 1 - 5 - 6 - 10 functionality. Finally, it can be installed in 19' rack cabinets using the supplied brackets.
PVA-4CR12
public address and emergency sound system control unit, capable of controlling and routing four simultaneous audio channels. A single controller supports up to 12 zones, and the system can be expanded to as many as 492 zones using 24-zone routers. Additionally, up to four controllers can be networked through the OMNEO interface module. The system is also EN 54-16 certified, ensuring compliance with emergency communication standards.
PVA-4R24
expansion of the PAVIRO system by 24 zones, supporting a total speaker load of 4000 W, with a maximum of 500 W per zone. It features 20 GPIs, 24 GPOs, and 2 control relays, and can accommodate up to 20 routers per controller. The system is EN 54-16 certified, ensuring compliance with recognized emergency communication standards.
QT-601-2
Quantec Controller
Supplies power to and controls a Quantec Addressable Call System.
Monitors all network devices and manages the routing and distribution of all calls.
Provides connections for network wiring, standby batteries, a laptop (for system programming), optional paging/DECT equipment, an optional printer or PC (to run Quantec’s QT707S Surveyor data management software).
Includes a library of 40 pre-set & 45 custom place names.
System setup requires a laptop PC running Quantec’s QT707 programming tools.
Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure.
System wiring requires one or more QT603 network splitters.
Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 T&E (spines) and 4 to 8 core stranded security cable (limbs)
QT-603
Quantec Network Splitter
An essential wiring/installation aid for C-TEC’s Quantec Addressable Call System.
Helps protect against open and short circuit faults and reduces the risk of volt drop.
Includes one input and one output connection for Quantec’s ‘Spine’ wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec’s field devices (typically 4 core stranded security cable).
At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find).
Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs.
Mounts on a standard 25mm UK double gang back box.
‘Power’ and ‘Fault’ indicators.
Max. 60 addressable devices per QT603.
QT602
Quantec Addressable Call Point, Button Reset c/w Remote Socket
A programmable addressable call point c/w remote jack socket for use with C-TEC’s Quantec Addressable Call System.
Includes a Call button, Reset button and red/green confidence light.
Can make up to 5 levels of call – Standard, Ensuite, Help Required, Emergency, Presence & Attendance (dependent on configuration and ancillary devices used). Attack and Attendance calls can also be made if connected to compatible infrared receiver.
Remote socket allows the connection of optional tail call leads, pressure mats, etc.
Can be programmed to operate in a multitude of ways using a QT423 configurator.
Connections provided for ancillary devices such as ceiling pulls, overdoor lights, infrared receivers and more
QT606
Overdoor Light
Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc.
Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call.
Dual red and green LEDs and triangular diffuser make it highly visible from a distance.
Mounts on a standard UK 25mm single gang flush or surface back box.
Finished in tough, durable ABS plastic.
Overdoor lights with sounders and addressable overdoor lights and sounders (to provide area indication at corridor junctions etc.) are also available.