Show sidebar
Show 9 12 18 24
Filters
Brands

MW1-RX-F4

a UHF receiver with 193 selectable channels and PLL-synthesized technology. It features pilot tone and noise squelch for clear signal reception, as well as true diversity for stable and reliable operation. The unit can be used as a tabletop device or mounted in a 19-inch rack.
Quick view

MXA1120

The 60W/120W amplifiers feature a comprehensive range of inputs and controls, including one XLR microphone input with phantom power and support for MBT 1101 series desk microphones (RJ45, CAT5 SFTP cable), as well as one MIC/LINE input with phantom power and a selectable MIC or LINE mode. They offer two XLR balanced microphone inputs with phantom power, including MIC1 equipped with A.P.T. (Automatic Priority Threshold) adjustment, and two AUX inputs for sound sources such as tape or CD. Micro-switches allow for setting priorities and input functions, supporting up to eight desk microphones with cascade connection. There is a TEL/EMERG input for emergency calls featuring input level and activation threshold (A.P.T.) adjustment. The amplifier provides a line auxiliary output and loudspeaker line outputs with constant voltage options of 50-70-100 V or low impedance 8 Ohm. Additional features include terminal strips for 24Vdc external power supply and precedence connection, along with warning signal (chime) level adjustment.
Quick view

NBE-3702-AL

Bullet 2MP 3.3-10.2mm IP66 IK10 IR
Quick view

NBE-3703-AL

Bullet 5MP 3.3-10.2mm IP66 IK10 IR
Quick view

NC802DB

Standard Call Point, Button Reset c/w Remote Socket An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device. Red reassurance LED confirms a call has been made. Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas). Mounts on a standard UK 25mm single gang flush or surface back box.
Quick view

NC802DEB-1/2

Emergency Call Point, Button Reset c/w Remote Socket An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device. Red reassurance LED confirms a call has been made. Onboard reset button cancels Standard and Emergency calls made from the NC802DEB-1/2 and Standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas). Mounts on a standard UK 25mm single gang flush or surface back box.
Quick view

NC805C/6

1.8m (6ft) Tail Call Lead A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug. Connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points. If connecting to a Quantec-Pro call point, a QP805G1A (6.5mm to RJ12) adaptor is also required, Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
Quick view

NC806CS

Overdoor Light c/w Sounder Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light. Dual red LEDs and triangular diffuser make it highly visible from a distance. Mounts on a standard UK 25mm single gang flush or surface back box. Can also be used as an 'area indicator' at corridor junctions, staff workstations, etc. Finished in tough, durable ABS plastic. Also available as part of the NC951 Accessible Toilet Alarm kit. Stainless steel version also available.
Quick view

NC806CS

Overdoor Light c/w Sounder Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light. Dual red LEDs and triangular diffuser make it highly visible from a distance. Mounts on a standard UK 25mm single gang flush or surface back box. Can also be used as an 'area indicator' at corridor junctions, staff workstations, etc. Finished in tough, durable ABS plastic. Also available as part of the NC951 Accessible Toilet Alarm kit. Stainless steel version also available.
Quick view

NC807C

Celling pull
Quick view

NC807C

Ceiling/Wall Pull Unit Can be used to generate a standard call on an 800 Series Conventional Call System. Ceiling or wall mountable. Typically wired to an 800 Series Call Point or Reset Point so that its calls can be cancelled. Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm. Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made. Surface mountable. Base fits 16mm conduit and BESA centres.
Quick view

NC809DBBT

Accessible Toilet Reset Point c/w Sounder A remote reset point c/w sounder specifically designed for use in Accessible Toilet Alarm systems. Allows calls generated by an NC807C ceiling pull unit to be cancelled at source, i.e. inside the WC. On-board reassurance LED and sounder provide audible and visual indication of an acknowledged call to reassure users that help is on the way (calls are acknowledged/accepted at an NC943B Single Zone Call Controller or an NC910/20 Range 10 to 20 Zone Call Controller). Mounts on a standard UK 25mm single gang flush or surface back box. Also available as part of the NC951 Accessible Toilet Alarm kit.
Quick view