NC802DEB-1/2 - Image 1
Click to enlarge
NC802DB
NC802DB
Back to products
NC806CS
NC806CS
c-tec

NC802DEB-1/2

Emergency Call Point, Button Reset c/w Remote Socket
An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System.
Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
Red reassurance LED confirms a call has been made.
Onboard reset button cancels Standard and Emergency calls made from the NC802DEB-1/2 and Standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
Mounts on a standard UK 25mm single gang flush or surface back box.

Category:
Description

Description

Emergency Call Point, Button Reset c/w Remote Socket
An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System.
Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
Red reassurance LED confirms a call has been made.
Onboard reset button cancels Standard and Emergency calls made from the NC802DEB-1/2 and Standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
Mounts on a standard UK 25mm single gang flush or surface back box.

Related products

Call Point Basic (920)

The Call Point Basic is our entry level addressable Call Point with pear lead connection and reassurance LED.
Quick view

Call Point Standard (922)

The Call Point Standard has the functionality of the Call Point Basic and features NFC technology to identify staff through Care Cards and Tokens, a LCD display to provide call information, and pairing with Intercall wearable technology.
Quick view

FJB2

Fused Junction Board
Quick view

NC920S

20 Zone Call Controller c/w 300mA PSU (Surface Version) 20 Zone Call Controller c/w 300mA PSU (Surface Version) Compatible with C-TEC’s entire range of 800 Series field devices. Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm Two call levels – standard (constant tone) and emergency (intermittent tone). Optional mute and call accept/reset buttons. ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used). Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.
Quick view

NP2

Pear Leads. Our attractively styled pear leads allow access to the call system when residents are away from the call point. The lead is available in 2Metre and 4 Metre lengths and the right angle jack plug means that the plug is less likely to be damaged by furniture movement.
Quick view

QT-603

Quantec Network Splitter An essential wiring/installation aid for C-TEC’s Quantec Addressable Call System. Helps protect against open and short circuit faults and reduces the risk of volt drop. Includes one input and one output connection for Quantec’s ‘Spine’ wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec’s field devices (typically 4 core stranded security cable). At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find). Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs. Mounts on a standard 25mm UK double gang back box. ‘Power’ and ‘Fault’ indicators. Max. 60 addressable devices per QT603.
Quick view

QT606

Overdoor Light Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc. Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call. Dual red and green LEDs and triangular diffuser make it highly visible from a distance. Mounts on a standard UK 25mm single gang flush or surface back box. Finished in tough, durable ABS plastic. Overdoor lights with sounders and addressable overdoor lights and sounders (to provide area indication at corridor junctions etc.) are also available.
Quick view

QT608CD1S

Quantec Large Corridor Display A large 16 character x 2 line LED display measuring 965mm x 163mm making it ideal for use in long corridors, nursing stations, staff rooms and offices. Utilises the latest LED technology to visually inform staff of the location of incoming calls (and occupied rooms) in large, easy-to-read text. All calls are displayed in red text except presence calls which are displayed in green. When no calls are present on the system the current time is shown in green. Typically used in conjunction with one or more standard QT608C displays as scroll and accept buttons ARE NOT included. Mains powered. Connects to Quantec via a QT615 display interface unit utilising a monitored RS232 data connection.
Quick view