Description
Description
Fused Junction Board
Related products
Call Point Plus (952)
Nursecall Intercall 952 Call Point Plus
The Call Point Plus has all the functionality of our Call Point Standard, with the addition of a full duplex VoIP speech device providing the instant reassurance of human interaction. Our most advanced call system it can be deployed in assisted living programmes where residents are more independent.
Call Point Standard (922)
NC910S
10 Zone Call Controller c/w 300mA PSU (Surface Version)
Compatible with C-TEC’s entire range of 800 Series field devices.
Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
Two call levels – standard (constant tone) and emergency (intermittent tone).
Optional mute and call accept/reset buttons.
‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used).
Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.
Innovative slide-in labelling system.
NP2
QT-603
Quantec Network Splitter
An essential wiring/installation aid for C-TEC’s Quantec Addressable Call System.
Helps protect against open and short circuit faults and reduces the risk of volt drop.
Includes one input and one output connection for Quantec’s ‘Spine’ wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec’s field devices (typically 4 core stranded security cable).
At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find).
Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs.
Mounts on a standard 25mm UK double gang back box.
‘Power’ and ‘Fault’ indicators.
Max. 60 addressable devices per QT603.
QT608CD1S
Quantec Large Corridor Display
A large 16 character x 2 line LED display measuring 965mm x 163mm making it ideal for use in long corridors, nursing stations, staff rooms and offices.
Utilises the latest LED technology to visually inform staff of the location of incoming calls (and occupied rooms) in large, easy-to-read text.
All calls are displayed in red text except presence calls which are displayed in green.
When no calls are present on the system the current time is shown in green.
Typically used in conjunction with one or more standard QT608C displays as scroll and accept buttons ARE NOT included.
Mains powered.
Connects to Quantec via a QT615 display interface unit utilising a monitored RS232 data connection.
Touch Display 948
The Touch Display is the central hub of the Touch series
nurse call system and the primary staff interaction point.
It helps nursing staff with monitoring while notifying them
of calls and alerts on the system, allowing them to decide
the most appropriate response. Multiple displays can be
installed, ideally on a desk or wall mounted, depending
on the size and individual needs of the care facility
