Smart Security
NC809DBBT
Accessible Toilet Reset Point c/w Sounder
A remote reset point c/w sounder specifically designed for use in Accessible Toilet Alarm systems.
Allows calls generated by an NC807C ceiling pull unit to be cancelled at source, i.e. inside the WC.
On-board reassurance LED and sounder provide audible and visual indication of an acknowledged call to reassure
users that help is on the way (calls are acknowledged/accepted at an NC943B Single Zone Call Controller or an
NC910/20 Range 10 to 20 Zone Call Controller).
Mounts on a standard UK 25mm single gang flush or surface back box.
Also available as part of the NC951 Accessible Toilet Alarm kit.
NC941
A single zone call controller c/w a 12V 250mA PSU and link-selectable Mute/Reset button.
Fully compatible with C-TEC's entire range of 800 Series Call System components.
Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
Power On and Alarm 'CALLING ' LEDs.
Open collector output goes to 12V when the controller's onboard buzzer sounds.
Mounts on a standard UK 25mm double gang flush or surface back box.
Optional NC941B 0.3A battery battery backup kit also available.
NC951
Accessible Disabled Persons Toilet Alarm Kit
Allows a distressed person to raise an alarm in an emergency. To operate, the user pulls the cord of
the ceiling/wall pull to activate a light and sounder outside the WC and on the system's Call Controller.
The system's ‘Call Accept’ function allows staff to send an intermittent call acknowledgment signal to the WC to
confirm help is on the way.
Includes an NC943B 12V 140mA Call Controller c/w standby battery & relay, NC807C Ceiling/Wall Pull, NC806CS
Overdoor Light c/w Sounder, NC809DBBT Accessible Toilet Reset Point c/w Sounder & NC949 Accessible WC
Sticker.Accessible Disabled Persons Toilet Alarm Kit
Allows a distressed person to raise an alarm in an emergency. To operate, the user pulls the cord of
the ceiling/wall pull to activate a light and sounder outside the WC and on the system's Call Controller.
The system's ‘Call Accept’ function allows staff to send an intermittent call acknowledgment signal to the WC to
confirm help is on the way.
Includes an NC943B 12V 140mA Call Controller c/w standby battery & relay, NC807C Ceiling/Wall Pull, NC806CS
Overdoor Light c/w Sounder, NC809DBBT Accessible Toilet Reset Point c/w Sounder & NC949 Accessible WC
Sticker.
NC951/SS
Stainless Steel Emergency Assistance Alarm Kit
Includes an NC941/SS 12V Stainless Steel Call Controller, NC806CS/SS Stainless Steel Overdoor Light c/w Sounder, NC809DB/SS Stainless Steel Reset Point and an NC807C Plastic Ceiling Pull.
Can be wired in 4 core stranded security cable.
Suitable for use in some high-profile disabled persons toilet alarm applications. Please note, if a fully BS8300 compliant accessible toilet alarm system is required consider using our NC951 standard plastic kit instead.
SD-2WP
is a two-wire photoelectric smoke detector from Mircom's SD Series, designed for compatibility with electrically compatible fire alarm control units. It uses advanced detection algorithms for reliability, has a low-profile design for easy installation, and is suitable for commercial, industrial, institutional, and residential use. Some versions, like the SD-2WP-LED, include a remote LED output for a visual alarm indicator.
SD-2WT
is a two-wire smoke detector that uses both photoelectric technology and a fixed-temperature heat sensor for enhanced detection capabilities. It is designed for use in commercial, industrial, and residential settings and can be connected to compatible fire alarm control units. An LED output model, the SD-2WT-LED, is also available.
SD1+
Auto dailer is a security system speech dialler that connects to an alarm control panel and automatically dials up to four phone numbers to deliver pre-recorded voice messages when an alarm is triggered. It features four inputs for different alarm conditions (like fire, burglary, or personal attack), has a built-in microphone and speaker for message recording, and allows the recipient to acknowledge the call by pressing '8' on their phone