Call Point Code Blue (920CB)
| Code Blue is the highest call system alert. Call Point Code Blue provides nursing staff with an immediate emergency call button. The location and code blue alert level is automatically broadcast across the nurse call system for priority actionCode Blue is the highest call system alert. Call Point Code Blue provides nursing staff with an immediate emergency call button. The location and code blue alert level is automatically broadcast across the nurse call system for priority action |
Description
Description
| Code Blue is the highest call system alert. Call Point Code Blue provides nursing staff with an immediate emergency call button. The location and code blue alert level is automatically broadcast across the nurse call system for priority actionCode Blue is the highest call system alert. Call Point Code Blue provides nursing staff with an immediate emergency call button. The location and code blue alert level is automatically broadcast across the nurse call system for priority action |
Related products
Call Point Plus (952)
Nursecall Intercall 952 Call Point Plus
The Call Point Plus has all the functionality of our Call Point Standard, with the addition of a full duplex VoIP speech device providing the instant reassurance of human interaction. Our most advanced call system it can be deployed in assisted living programmes where residents are more independent.
L622
Standard Call Point.
A Call Point is required for every individual call location on the system. It features six levels of
call, multi-colour re-assurance LED & ‘call follower’ sounder. The industry standard trigger
socket will accept pear leads, pressure mats, portable radio triggers and a host of other triggering
devices.
L628
LCD Displays.
A Display Unit is required in every location where calls are to be shown and the alarm is to
sound. It features LCD display with backlight, multi-level adjustable alarm, day/night volume
control, ‘Priority’ alarm tone for specific call locations, configuration menus and an output
which can be connected to trigger external equipment. All displays are identical but can be
configured on site to operate independently.
NC802DB
Standard Call Point, Button Reset c/w Remote Socket
An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
Red reassurance LED confirms a call has been made.
Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
Mounts on a standard UK 25mm single gang flush or surface back box.
QT-601-2
Quantec Controller
Supplies power to and controls a Quantec Addressable Call System.
Monitors all network devices and manages the routing and distribution of all calls.
Provides connections for network wiring, standby batteries, a laptop (for system programming), optional paging/DECT equipment, an optional printer or PC (to run Quantec’s QT707S Surveyor data management software).
Includes a library of 40 pre-set & 45 custom place names.
System setup requires a laptop PC running Quantec’s QT707 programming tools.
Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure.
System wiring requires one or more QT603 network splitters.
Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 T&E (spines) and 4 to 8 core stranded security cable (limbs)
QT-603
Quantec Network Splitter
An essential wiring/installation aid for C-TEC’s Quantec Addressable Call System.
Helps protect against open and short circuit faults and reduces the risk of volt drop.
Includes one input and one output connection for Quantec’s ‘Spine’ wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec’s field devices (typically 4 core stranded security cable).
At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find).
Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs.
Mounts on a standard 25mm UK double gang back box.
‘Power’ and ‘Fault’ indicators.
Max. 60 addressable devices per QT603.
Touch Display Plus 958
The Touch Display Plus has all the functionality
of our Touch Display, with the addition of
a full duplex VoIP speech device.
Perfect for larger hospitals or care residences,
the Touch Display Plus allows staff to speak
to patients and residents allowing them to
decide the most appropriate response.