MCT80M
The MCT80M is an access terminal dedicated to RACS 5 access control and building automation system.
Terminal enables identification of users by means of 13.56 MHz MIFARE Ultralight® and MIFARE® Classic cards. MCT80M is equipped with RS485 interface which is used for communication with access controller.
Because of its relatively small size, reader can be also used as locker/cabinet reader. MCT80M can be installed in outdoor locations without any additional protection measures. The MCT80M is aligned with QUADRUS series product line.
Features
access terminal for RACS 5
13.56 MHz MIFARE Ultralight/Classic reader
3 LEDs
buzzer
RS485
tamper
outdoor environment
QUADRUS product line design
dimensions: 100.0 x 45.0 x 16.0 mm (height x width x depth)
CE mark
Description
Description
The MCT80M is an access terminal dedicated to RACS 5 access control and building automation system.
Terminal enables identification of users by means of 13.56 MHz MIFARE Ultralight® and MIFARE® Classic cards. MCT80M is equipped with RS485 interface which is used for communication with access controller.
Because of its relatively small size, reader can be also used as locker/cabinet reader. MCT80M can be installed in outdoor locations without any additional protection measures. The MCT80M is aligned with QUADRUS series product line.
Features
access terminal for RACS 5
13.56 MHz MIFARE Ultralight/Classic reader
3 LEDs
buzzer
RS485
tamper
outdoor environment
QUADRUS product line design
dimensions: 100.0 x 45.0 x 16.0 mm (height x width x depth)
CE mark
Related products
FL-RL-RD
Conventional xenon sounder beacon for fire and industrial alarm systems, providing both a loud audible alarm and a bright visual flashing light. The "D" in the model number specifically denotes the deep base variant, which is often weatherproof (IP65 rated) for harsher environments. It combines a sounder and a visual beacon into a single unit, reducing installation time and cost.
MASB860
Intelligent, addressable wall-mounted sounder beacon for use in fire alarm systems that combines an audible sounder and a visual LED beacon for emergency evacuation signals. It is designed for low current consumption while providing high sound output and features a built-in short-circuit isolator and soft-addressing for easy installation. There is also a weatherproof (WP) version, the MASB860WP, with an IP66 rating for outdoor use.
SG42BK1
Addressable manual station double action • Single/dual action options, Complete with Initiating module
(addressable variants only), Key reset , Corrosion resistant gold plated SPST contacts,High-gloss red enamel finish with raised, white lettering, Class A, style 7 SLC, Quick and simple to install, High quality die cast metal case for lasting, performance, No hard addressing required with initiating unit (ULMCIM-C - plug and play)
Easy to maintain/service.
UCHR-2W
Is a 2-wire conventional fire detector that combines both rate-of-rise and fixed heat detection. It is designed to respond to a rapid increase in temperature and/or temperatures exceeding a threshold of \(135^{\circ }F\) (\(60^{\circ }C\)), making it suitable for environments where smoke detectors may cause false alarms, such as those with high levels of dust or steam.
ULMCIM-C
Is a compact, soft-addressed single-channel input module for Eaton intelligent addressable fire alarm systems that monitors non-addressable, dry contact devices like water flow switches or auxiliary fault signals. The "-C" variant is specifically designed for use with pull stations and is identified by the panel as a callpoint. It features an integral short circuit isolator and can be easily installed inside other equipment.