Touch-RU

Overdoor lights are an optional item normally positioned above the door in a corridor to indicate the status of the call point(s) within the room. The L746 can be used to monitor several call point addresses and are ideal for ‘end of corridor’ indication

1.8m (6ft) Tail Call Lead A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug. Connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points. If connecting to a Quantec-Pro call point, a QP805G1A (6.5mm to RJ12) adaptor is also required, Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.

20 Zone Call Controller c/w 300mA PSU (Surface Version) 20 Zone Call Controller c/w 300mA PSU (Surface Version) Compatible with C-TEC’s entire range of 800 Series field devices. Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm Two call levels – standard (constant tone) and emergency (intermittent tone). Optional mute and call accept/reset buttons. ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used). Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.

The Touch Display Plus has all the functionality of our Touch Display, with the addition of a full duplex VoIP speech device. Perfect for larger hospitals or care residences, the Touch Display Plus allows staff to speak to patients and residents allowing them to decide the most appropriate response.