MC16-PAC-EX-2-KIT
Two-door access control kit for the RACS 5 v2 EX system.
The kit comprises a metal enclosure with a power supply, a door expander and a network access controller. MC16-PAC-EX-2-KIT enables the implementation of read-in/read-out access control for two doors using RS485 (MCT series readers), RACS CLK/DTA (PRT series readers) or Wiegand readers.
Description
Description
Two-door access control kit for the RACS 5 v2 EX system.
The kit comprises a metal enclosure with a power supply, a door expander and a network access controller. MC16-PAC-EX-2-KIT enables the implementation of read-in/read-out access control for two doors using RS485 (MCT series readers), RACS CLK/DTA (PRT series readers) or Wiegand readers.
Related products
EFBW8ZFLEX
Is aeight -zone fire alarm control panel that uniquely combines both two-wire and conventional wiring technologies. This means each zone can be individually configured to operate as either a two-wire or a conventional system, allowing for a flexible mix of both types of devices on the same panel. It features an intuitive interface for straightforward programming and maintenance and meets the EN54 parts 2 and 4 standards.
MBG914
Conventional fire alarm manual call point that is surface-mounted and used for fire emergency signaling. It is red, features a break-glass design with a protective film on the glass, and is easy to install. Key features include a high-visibility status LED, compatibility with Menvier conventional fire panels, and an included test key for maintenance.
UCHR-2W
Is a 2-wire conventional fire detector that combines both rate-of-rise and fixed heat detection. It is designed to respond to a rapid increase in temperature and/or temperatures exceeding a threshold of \(135^{\circ }F\) (\(60^{\circ }C\)), making it suitable for environments where smoke detectors may cause false alarms, such as those with high levels of dust or steam.
UCPD-2W
2-Wire, conventional optical smoke detector from Eaton's UL-listed conventional detector range. It's designed for easy installation and maintenance, featuring a discreet, aesthetically pleasing design, a common mounting base, and 360° visibility via a lightpipe LED. This detector is best for detecting slow-burning or smoldering fires that produce large, visible smoke particles.
ULMCOM
Addressable control module a compact, UL-listed micro single-channel output unit for Eaton intelligent addressable fire alarm systems. It provides a solution for switching low-voltage control circuits, such as for HVAC, plant shutdown, or fire doors, and features soft addressing and an integral short-circuit isolator.
ULMCOM-S
Is a compact, UL-listed single-channel output unit for Eaton's addressable fire alarm systems, which is identified by the panel as a sounder. It is used to control low-voltage devices by switching them, such as for fire door closures or plant shutdown circuits. The "S" designation signifies its primary use as a sounder, and it features easy, "plug and play" installation with no hard addressing required.