NC805C/6

Advanced Touchscreen Display Panel

Emergency Call Point, Button Reset c/w Remote Socket An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device. Red reassurance LED confirms a call has been made. Onboard reset button cancels Standard and Emergency calls made from the NC802DEB-1/2 and Standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas). Mounts on a standard UK 25mm single gang flush or surface back box.

Quantec Network Splitter An essential wiring/installation aid for C-TEC’s Quantec Addressable Call System. Helps protect against open and short circuit faults and reduces the risk of volt drop. Includes one input and one output connection for Quantec’s ‘Spine’ wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec’s field devices (typically 4 core stranded security cable). At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find). Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs. Mounts on a standard 25mm UK double gang back box. ‘Power’ and ‘Fault’ indicators. Max. 60 addressable devices per QT603.

The Touch Display is the central hub of the Touch series nurse call system and the primary staff interaction point. It helps nursing staff with monitoring while notifying them of calls and alerts on the system, allowing them to decide the most appropriate response. Multiple displays can be installed, ideally on a desk or wall mounted, depending on the size and individual needs of the care facility