Related products
Call Point Code Blue (920CB)
| Code Blue is the highest call system alert. Call Point Code Blue provides nursing staff with an immediate emergency call button. The location and code blue alert level is automatically broadcast across the nurse call system for priority actionCode Blue is the highest call system alert. Call Point Code Blue provides nursing staff with an immediate emergency call button. The location and code blue alert level is automatically broadcast across the nurse call system for priority action |
L622
Standard Call Point.
A Call Point is required for every individual call location on the system. It features six levels of
call, multi-colour re-assurance LED & ‘call follower’ sounder. The industry standard trigger
socket will accept pear leads, pressure mats, portable radio triggers and a host of other triggering
devices.
NC802DEB-1/2
Emergency Call Point, Button Reset c/w Remote Socket
An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System.
Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
Red reassurance LED confirms a call has been made.
Onboard reset button cancels Standard and Emergency calls made from the NC802DEB-1/2 and Standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
Mounts on a standard UK 25mm single gang flush or surface back box.
NC910S
10 Zone Call Controller c/w 300mA PSU (Surface Version)
Compatible with C-TEC’s entire range of 800 Series field devices.
Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
Two call levels – standard (constant tone) and emergency (intermittent tone).
Optional mute and call accept/reset buttons.
‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used).
Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.
Innovative slide-in labelling system.
QT-603
Quantec Network Splitter
An essential wiring/installation aid for C-TEC’s Quantec Addressable Call System.
Helps protect against open and short circuit faults and reduces the risk of volt drop.
Includes one input and one output connection for Quantec’s ‘Spine’ wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec’s field devices (typically 4 core stranded security cable).
At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find).
Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs.
Mounts on a standard 25mm UK double gang back box.
‘Power’ and ‘Fault’ indicators.
Max. 60 addressable devices per QT603.
QT602
Quantec Addressable Call Point, Button Reset c/w Remote Socket
A programmable addressable call point c/w remote jack socket for use with C-TEC’s Quantec Addressable Call System.
Includes a Call button, Reset button and red/green confidence light.
Can make up to 5 levels of call – Standard, Ensuite, Help Required, Emergency, Presence & Attendance (dependent on configuration and ancillary devices used). Attack and Attendance calls can also be made if connected to compatible infrared receiver.
Remote socket allows the connection of optional tail call leads, pressure mats, etc.
Can be programmed to operate in a multitude of ways using a QT423 configurator.
Connections provided for ancillary devices such as ceiling pulls, overdoor lights, infrared receivers and more
QT606
Overdoor Light
Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc.
Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call.
Dual red and green LEDs and triangular diffuser make it highly visible from a distance.
Mounts on a standard UK 25mm single gang flush or surface back box.
Finished in tough, durable ABS plastic.
Overdoor lights with sounders and addressable overdoor lights and sounders (to provide area indication at corridor junctions etc.) are also available.